Our stainless steel Pan-Ring burner kits come complete with everything you need to start your outdoor fire pit project.
We start with 304 stainless steel so your burner will remain trouble free in the outdoors. All of our flame holes are precession drilled not punched so there are no tabs pushed inside restricting gas flow. By using our stainless steel Burner Pan-Rings you have a corrosive resistant protective solid flat surface to work with.
Our NEW DELUXE connection kit has been assembled using matching components to assure the best performance i.e. 2 Non-Whistle flex lines and a high-flow keyed main shut off ball valve. All this adds up to exactly what you are looking for; the highest possible flames with the most complete and easiest kit to install your burner. To give you that professional touch, we have added a battery spark ignition kit to make starting your fire pit even easier.
Please note, your incoming gas line size needs to be matched to the size of your burner. On average you will need a 1/2 inch line for 18, 22, 30 inch pan-rings. The 36, 40 inch pans will most likely require a 3/4 inch gas line. These are general guidelines and not meant to be used as suggested gas line sizes; you will need to consult your installer for the exact size of line needed. We always recommend that all gas products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes.
- 18-inch Stainless Steel Flat Pan with 12-inch Stainless Steel Burner
- 1/2-inch Connection Hub
- 1/2-inch Keyed Main Shut Off Valve
- 1/2-inch x 24-inch Non-Whistle Flex Line
- 1/2-inch x 18-inch Non-Whistle Flex Line
- Gas Source Shut Off Valve
- Spark Ignition Kit
- Mounting Plate for Keyed Ball Valve and Spark Igniter